| 1. |
Please take note all of the
precautions applied for Spacia itself. |
|
|
| 2. |
Some of the glazing materials or so
in contact with the laminated glass edge induce the delamination trouble in
lamination part through the chemical reaction in actual use. In general, the
following materials are recommended. |
|
|
|
|
Sealant |
Silicone sealants except acetic acid type and
without hardening accelerator are recommended. |
|
Putty |
It is required to use the putty which is
confirmed of no trouble through the test. |
|
|
(Test : laminated glass sample in contact with
the test putty is kept in temperature of 55oC and in humidity of 95% for a
month) |
|
Recommended
glazing materials like gasket, setting block and so on |
|
|
Hardening accelerator free materials such as
EPDM-S, POM (Polyoxymethelen), Butyl rubber , hard type of PVC. |
|
|
| 3. |
In the use at higher temperature
than 50 oC, please consult with us beforehand . |
|
|
| 4. |
Please avoid of use at higher
temperature than 60oC because of the damage of lamination film. |
|
|
| 5. |
At any time before use, it is
required to confirm no trouble in thermal breakage based on the computer
simulation model. |
